Home shop, not a production bay

Buy the first welder that matches the outlet you have.

First Bead compares beginner and home MIG machines on voltage, duty cycle, and aluminum support. The notes come from spec sheets and store listings, not from a weld we ran.

Start here
MachineBest forPowerDuty cycleProcessesPriceRetailer
Hobart Handler 140EZFirst gas MIG, 120 V only120V90 A at 30%MIG, flux-core$720.00Price as of Nov 18, 2026; may change.Check price at Atlas Welding Supply
ARCCAPTAIN MIG200Lowest price that can grow to 240 V110/220V60% (amps not stated)MIG, flux, lift TIG, stick$349.99Price as of Nov 18, 2026; may change.Check price at ARCCAPTAIN
Hobart Handler 210iHome shop that can use 240 V120/240V25% at 210 A (240V)MIG, flux-core$999.00Price as of Nov 18, 2026; may change.Check price at Cyberweld
PrimeWeld MIG180Aluminum, with the spool gun included120/240V30% at 180 AMIG, flux, stick, spool gun$549.00Price as of Nov 18, 2026; may change.Check price at PrimeWeld
PrimeWeld TIG225XClean aluminum, if you will learn AC TIG120/240V40% at max TIG outputAC/DC TIG, DC stick$849.00Price as of Nov 18, 2026; may change.Check price at PrimeWeld

Three questions, three guides

Best welder for beginners

The right first machine is the one that matches the outlet on the wall, the steel you actually have, and whether you will own a gas bottle. The biggest amp number on the carton is a poor way to choose.

Read the guide

Best MIG welder for home use

A home shop is a thickness problem and an outlet problem. The useful machines here weld from sheet metal up to about 3/8 in, and they tell you how long they can hold an arc before they rest.

Read the guide

Best welder for aluminum

Aluminum wants either a spool gun and 100% argon, or an AC TIG arc that can clean the oxide. A MIG machine that “also does TIG” is usually DC lift TIG, and that will not weld aluminum.

Read the guide

The decision is smaller than the aisle

Most bad first welders are bought on the largest amp number that fit the budget. The amp number is a ceiling. The duty cycle tells you how long you can stay near that ceiling, and the plug tells you whether you can reach it at all. A Handler 210i on a 15 amp household circuit is a 45 amp welder. Hobart prints that. The carton still says 210.

Gas is the other fork. Flux-core needs no bottle and makes more smoke. Gas MIG needs a cylinder and looks cleaner. Aluminum needs a third thing: a spool gun or an AC TIG arc, plus 100% argon. A “multiprocess” sticker that only means DC lift TIG will not weld aluminum.

If you want the short version, use the table above. If you want the reasoning, start with the welder hub. Prices on this site were checked Nov 18, 2026 and will move.

What this site will not do

  • Invent a hands-on test, a star rating, or a person who “welded these for 20 years.”
  • Rank industrial packages, engine drives, or production aluminum cells.
  • Tell you to rewire a dryer outlet. That is an electrician’s job, using the manual’s breaker size.

Safety, in short: helmet, ventilation, and the circuit the manual names. The guides link the OSHA pages.